Résumé du cours
This four-day course is designed to provide students with the knowledge required to configure and manage subscriber management on devices running the Junos operating system. This course focuses on the main configuration components of subscriber management, including subscriber authentication, authorization, and accounting (AAA), Dynamic Host Configuration Protocol (DHCP) local server and DHCP relay/proxy agent, the Point-to-Point Protocol (PPP), subscriber addressing, dynamic profiles, subscriber interfaces, Layer 3 and Layer 2 wholesale services, Pseudowire Head-End Termination (PHT), L2TP, dynamic firewall services, subscriber class of service (CoS), dynamic multicast services, basic NAT and CGN functions, and Subscriber Secure Policy (SSP, or Lawful Intercept).
Through demonstrations and hands-on labs, students will gain experience in configuring, monitoring, and troubleshooting subscriber management features on MX Series Universal Edge Routers running the Junos OS.
This course is based on the Junos OS Release 18.1R1.9.
A qui s'adresse cette formation
This course is intended for network administrators who configure and administer subscriber management features on MX routers running the Junos OS.
Pré-requis
- A strong base of networking fundamentals;
- A high-level understanding of broadband access concepts;
- Experience and familiarity with the Junos OS;
- Familiarity with the Junos command-line interface (CLI); and
- Completion of the Introduction to the Junos Operating System (IJOS) course.
Objectifs
After successfully completing this course, you should be able to:
- Describe the various WAN domains.
- Describe the use cases for NorthStar.
- Describe the use cases for NorthStar Planner.
- Describe the usage of PCEP.
- Describe RSVP signaling using the CSPF algorithm.
- Describe the NorthStar VMs and their processes.
- Describe the post installation setup process.
- Describe the behavior of topology discovery.
- Describe the configuration of IGP topology discovery.
- Describe the configuration of BGP-LS topology discovery.
- Describe how to access the NorthStar Controller Operator and Planner user interfaces.
- Describe the basic features of the NorthStar Controller Operator user interface.
- Describe the various LSP types.
- Configure PCC controlled LSPs.
- Configure PCE delegated LSPs.
- Configure PCE initiated LSPs.
- Monitor LSPs from the NorthStar Operator user interface.
- Describe primary, secondary, and standby LSPs.
- Describe symmetric pairs of LSPs.
- Describe diversity groups.
- Describe using Junos MPLS LSP templates.
- Describe LSP calendaring.
- Describe Inter-AS LSPs.
- Describe how to provision multiple LSPs.
- Describe LSP optimization.
- Configure Segment Routing
- Manage NorthStar using the REST API
- Troubleshoot NorthStar Controller
- Create P2MP LSPs
- Explain the features, capabilities, and benefits of NorthStar Planner and how they work to optimize WAN design.
- Access NorthStar Planner and navigate and customize the NorthStar Planner administrative interface.
- Explain different methods of creating a network model.
- Manage different files that make up a network model and understand how these files are organized.
- Modify a network model by performing tasks such as adding links, nodes, and sites and save these changes to a modeled network.
- Optimize network demand paths, design diverse paths, and perform what-if scenarios to see how demands are routed.
- Simulate link and node failures and view the effects of these failures on demand routing across the WAN.
- Analyze and manage network information using the Report Manager interface.
- Perform hardware inventory using the NorthStar Planner interface.
Contenu
Day 1
1 Course Introduction
2 Introduction to Subscriber Management
- Overview and Terminology
- Broadband Access Network Design and Concepts
- Configuration and Operational Flow
- Software Licensing
3 Access Management
- Access Management Overview
- AAA Services
- Extended DHCP Local Server
- Extended DHCP Relay
- Subscriber Addressing
- L2TP Subscriber Access
LAB 1: Configuring Subscriber Access
4 Subscriber Interfaces and Dynamic Profiles
- Junos Interfaces Overview
- VLAN Types
- Dynamic Profiles
- Subscriber Interfaces
- Monitoring and Troubleshooting Tools
LAB 2: Configuring Interfaces and Dynamic Profiles
Day 2
5 Dynamic PPPoE for Subscriber Access
- PPPoE Overview
- Dynamic PPPoE Overview and Operational Flow
- Dynamic PPPoE Interface Configuration
- PPPoE Service Table Names
LAB 3: Configuring Dynamic PPPoE Subscriber Access
6 Layer 3 and Layer 2 Wholesale Services
- Wholesale Services Overview
- Layer 3 DHCP Wholesale
- Layer 3 PPPoE Wholesale
- Layer 2 Wholesale
LAB 4: Configuring Layer 3 Wholesale Services
7 Layer 2 Tunneling Protocol (L2TP)
- L2TP Overview
- LAC and LNS Functions
- LAC Tunnel Selection
- L2TP Configuration
LAB 5: Configuring L2TP for Subscriber Access
Day 3
8 Pseudowire Head-End Termination (PHT)
- MPLS Pseudowire for Subscribers
- Pseudowire Subscriber Interfaces
- Configuring Hierarchical CoS Pseudowire Subscriber Interfaces
LAB 6: Configuring MPLS Pseudowire for Subscribers
9 Subscriber Class of Service
- Class of Service Overview
- Traffic Classification, Queuing, and Scheduling
- Implementing Subscriber Class of Service
- Monitoring and Troubleshooting Tools
LAB 7: Configuring Subscriber Class of Service
10 Dynamic Firewall Services
- Firewall Filters Overview
- Implementing Dynamic Firewall Services
- Monitoring Firewall Filters and Counters
LAB 8: Configuring Dynamic Firewall Services
Day 4
11 Dynamic Multicast Services
- IGMP Overview
- Implementing Dynamic Multicast Services
- Monitoring Multicast and IGMP
LAB 9: Configuring Dynamic Multicast Services
12 Carrier Services
- NAT and CGNAT Services
- Subscriber Secure Policy (Lawful Intercept)